The new robot PW848T is specially designed for injection molding machines with mold force between 500 ~ 1200 tons. The maximum stroke of the three main axis is Z: 9000mm / X: 1200mm / Y: 2000mm. The design of the movable X-axis can make the space for EOAT larger, so as to match the larger injection molding machine. The telescopic Y-axis design further improves the operation stability of the robot. The maximum payload of this model is 20kg, which can meet a kind of complex automation application.

Evaporative chiller: 1. In the future, the injection molding workshop of the central water supply system of the whole plant will not need cooling water tower, pool and cooling water pump, so as to save installation time and floor space, and realize the constant temperature of the whole plant (+ 5 ℃ to + 35 ℃, with adjustable temperature). 2. Power saving: low condensation temperature, low power consumption of the unit and good refrigeration capacity. Compared with air cooling, water cooling unit saves energy. 3. Water saving: the evaporation condenser mainly uses the latent heat of vaporization of water, and the water consumption is small. Compared with water-cooled units, it saves water. 4. Cost saving: saving time, space, electricity and water is equal to saving cost. 5. Easy to use: the unit can be used after connecting the pipeline and power supply. No additional supporting equipment is required. 6. Water quality: the evaporative chiller adopts a closed process chilled water circulation system to 100% eliminate the direct contact between process chilled water and air. High quality water quality can greatly improve the service life of the main engine, mold, auxiliary equipment and pipeline in the production process. 7. Outdoor temperature limit: the cooling water tower cannot be used at the outdoor temperature (- 35 ℃ to + 45 ℃), and the evaporative chiller can be used normally without being affected by the ambient temperature. 8 maintenance: descaling agent or antifreeze can be added in the closed process chilled water circulation system, and pipeline maintenance can be carried out while working during equipment operation.

Chris DeVOCTM cleaning process reduces odours caused by low volatility, high molecular substances. The technology keeps the pellets at the required temperature at which volatile materials can be discharged quickly and in depth. Particularly energy-saving: n lower operating and maintenance costs n Odour treatment without the use of additional, expensive additives n The unit energy consumption is 1/3-1/2 of the same type of equipment The product is widely used and verified in the application occasions with strict requirements on material odor.

Polymer Supercritical Foam Extrusion Production Line made by Useon for the production of Extruded Polystyrene (XPS), is an environment friendly product featured by perfect closed cell structure, low water absorption, low thermal conductivity, high compression and anti-aging performance.

This product is designed distinctively, combined with the multiplier technology of the gradiant multilayer feedblock and the co-extrusion technology of three-layer manifold die, effectively improves the mechanical and barrier properties of the film product, as well as the heat resisting and cold endurance properties. Meanwhile, the high barrier film product is more uniform in the thickness and with a smaller deviation, and the bi-oriented stretch film die can realise the possibility of high automation and high speed production.

JE10800WM-1700/A1100 hybrid inject molding machine is an innovative solution used in Multi-Component application. There are 2 electrical injection units deployed face to face and a clamping unit with two platen structure driven by hydraulic energy. The machinery has the highlights as following: injection Precision, Efficiency for high-volume production, Wide application range, Low consumption, Generous mold installation space, Big clearance, Compact design, etc.,

ARBURG control pilot function includes screw pilot, pressure pilot and reference pilot. It mainly aimed at the innovative development of hardware and software of injection molding machine. In order to achieve the consistency of injection product quality, actively and effectively compensate the fluidity of raw materials and environmental fluctuations, so as to reduce resource waste and improve production efficiency and economic benefits.

Javachem®FRSI, the silicone-based flame retardant synergistic agent, is a siloxane polymer that contains a large amount of Q-type silicon. It can promote the generation of char-forming barrier layer, effectively block oxygen, combustible micromolecule gases and heat, thus flame retardancy can be achieved. The combination of Javachem®FRSI, base resins and basic flame retardants can reduce the amount of basic flame retardants. It characterizes by good thermal stability, low volatility, good compatibility, no irritation, no odor when application and no chemical reaction with other chemicals, pigments or surface coatings. It can improve flame retardancy of nylon, polyester and polyolefin systems and the processing performance of materials can also be improved.

SABIC offers a series of bio-based renewable resins and compounds with wide application in eyewear and smart eyewear fields. 1) SABIC’s certified renewable polycarbonate, is part of the company’s TRUCIRCLE™ portfolio and services. Based on SABIC’s cradle-to-gate peer-reviewed LCA study, use of SABIC’s LEXAN polycarbonate resin can potentially result in reductions in carbon footprint of up to 61% and fossil depletion reduction of up to 35%. 2) SABIC’s bio-based LNP™ compound could be applied in consumer electronics industry with high performances helping achieve lightweight, cost reduction and efficiency improvement, while it could also contribute to the carbon neutral goals of customers. SABIC’s bio-based ULTM™ resin (PEI) could be widely applied in the eyewear applications. Compared to its fossil-based grades, it has the potential to reduce up to 10% carbon footprint, and it has also received ISCC+ certification.

The material is used in wafer box in chip manufacturing field. Long-term use will not have foreign body precipitation, protect the wafer from contamination. Good wear resistance, no dust and particles after wafer repeatedly inserted installation. Permanent anti-static, can meet the load-bearing requirements of wafer box, drop - impact resistance and high surface gloss requirements.

SG-20 chain extenders in the Bio-Master ® series can effectively increase the melt strength of biodegradable materials such as PLA, PBAT and PBS at low dosage, improve mechanical properties, and improve the processing stability of materials to meet various processing requirements such as foaming and film blowing, without affecting the biodegradability of materials.

The Heat-Shrinkage Label Scrapping Machine (hereinafter referred to as the label scrapping machine) is applied to the label scrapping section of the PET bottle recycling system. Input capacity: 3.5 tons/hour, up to 4.5 tons/hour according to the waste PET bottles conditions and operation. the special design of the mechanical structure prolongs the life of the device, improving the label separation rate, meanwhile, ensuring the lowest bottle broken rate. The blades can be quickly disassembled and replaced thanks to the excellent structural design and have a longer service life.

Dow INFINAIR™ Polyolefin Elastomers are designed for 3D loop to support mattress product innovation. It provides super comfort and high durability features to the 3D loop mattress. Compared to conventional PU foam, it has several distinct advantages on low odor, water washable and easy recycling, which meet the Green & Safe trend for home products.

Designed to achieve sustainability goals, the reSound™ OM bio-based TPEs utilize between 40%~50% bio-renewable content derived from sugarcane, and can reduce carbon footprint compared to traditional petroleum-based TPEs. reSound™ OM TPEs are formulated for durability, delivering property retention and UV resistance compared to traditional TPEs. The hardness levels are between 30A and 90A, and can be suited for overmolding onto PP or PC, ABS, which is the ideal solution to help customers achieve the sustainability goal. With an opaque natural color, reSound™ OM materials are easily colorable with traditional TPE or sustainable colorant from Avient. The production wastes are recyclable, which facilitates the achievement of sustainable development by customers.