2012 Ringier Technology Innovation Awards - Plastics
Year:
- Mold Blowing Machine KCC20D-6F-3LAYER
-
Blow Molding machine KCC20D is for producing high-quality and high output moderate volume articles with PE, PP, PVC and PETG, such as the packaging of cosmetics, petroleum, chemicals, pharmaceuticals, food products which up to 15 liters. Mainly usingnike
-
Foshan Shunde Kautex Plastics Technology Co., Ltd.
- Two-platen Injection Molding Machine FORZA Series
-
The LK Forza two-platen plastic injection machine has used the innovative two platen locking mechanism. The Forza has retained the fully hydraulic direct clamping characteristic, while it offers longer closing stroke and bigger mould height in comparBoots
-
L.K. Technology Holdings Limited
- Thermal Plastic Composite High Speed Thermo-forming
-
The organo sheet is preheated, for example by IR, to temperature higher than Tg, and then transferred to compression. The compression mold could be hot or cold mold with mold temperature controller or cooling system. With high mold temperature close Nike Jordan
-
Evonik Degussa Specialty Chemicals (Shanghai) Co., Ltd.
- RM200QC Portable Imaging Spectrocolorimeter
-
RM200QC imaging spectrocolorimeter is XRITE latest portable color measuring device intended to help customer improve on site product color quality check and facilitate that process by providing direct quality check report through the device. It emploAir Max Flair KPU
-
X-Rite
- Thermoplastic Molding Process of Lusin ® Series Products
-
Lusin ® Clean G Series purging compounds is a ready-to-use granular cleaning material for thermoplastic injection molding and extrusion processing equipment, screw, barrel, die and hot runner cleaning, can be applied to the food industry. Does not coAir Jordan Sneaker
-
Chem-Trend (Shanghai) Trading Co., Ltd.
- Melt-CUBE Hot Runner System for Medical Industry
-
The Melt-CUBE allows simultaneous gating of 2 to 16 cavities and easy tip replacement in the press. The patent pending design also enables faster cycles and pristine gates with an additional temperature control zone at the gate. The minimized gate toMens Trainers
-
Mold-Masters (Kunshan) Co., Ltd.
- Akulon® Fuel Lock_塑料2012
-
DSM has been awarded the Executive Order (EO) for Akulon® Fuel Lock FL40-HP, a blow moldable, polyamide 6-based mono-material. This award, granted by the California Air Resources Board (CARB), certifies that the material meets the low permeation of hZoom Lebron XI 11
-
DSM Engineering Plastics
- High Speed PET Preform Injection System
-
-
Guangdong Yizumi Precision Machinery Co., Ltd.
- Ceramic Injection Barrel
-
Ceramic Injection Barrel uses the material of SiC composite ceramics which has good anti-friction and anti-wear properties, compared with any other metal materials. SiC composite ceramics also has excellent chemical stability, it is almost resistant Nike Zoom Vomero 12
-
Shanghai Alpha Machinery Co., Ltd.
- Spectrophotometer CM-3700A
-
CM-3700A is a high-accuracy, top-class model filled with Konica Minolta’s advanced optical technology, which has been awarded the first prize by NPL (National Physical Laboratory). Ideal for demanding customers with strict requirements for R&D, QC, aAir Jordan III 3 Shoes
-
Konica Minolta (China) Investment Ltd.
- SYSTEC 100-430 C
-
Demag Ningbo made injection moulding machine Systec 100-430 C is equipped with the latest developed servo pump technology as the drive system. Featuring with high precision, quick response, excellent brake performance and high mechanical efficiency, sneakers
-
Demag Plastics Machinery (Ningbo) Co., Ltd.
- PERT 5-Layers Antioxidant Composite Pipe Die-head for Floor-heating
-
The die head is specially suitable for the production of 5-layer co-extrusion line for PE-RT oxygen resistance floor warming pipes, the structure of spiral was adopted for the diffluence of each glue layer, which perfectly control the stable diffluenWomens Bandeau
-
DEKUMA
- Therma-Tech™ Thermally Conductive Plastics
-
PolyOne’s Therma-Tech™ thermal management solutions for advanced lighting applications have been engineered to combine the heat transfer and cooling capabilities of metals with the design freedom, weight reduction and cost advantages of thermoplasticAir Zoom Vomero 12
-
PolyOne Corporation
- Twin Screw Extruder ZSK Mc18
-
With its specific torque of 18 Nm/cm3 the ZSK Mc18 is the most productive high performance ZSK of all times. It stands for considerable throughput increases with improved product quality and maximum efficiency. With its torque of 18 Nm/cm3 the new ZSAir Jordan Releases 2019
-
Coperion (Nanjing) Machinery Co., Ltd.
- DCX Series Ultrasonic Plastic Welding Power Suppliers for Automated Assembly
-
DCX as Branson’s newest evolution in ultrasonic power supplier combines scalable technology and closed loop amplitude control to provide enhanced performance. Specially designed for application in packaging, textile, food and automotive industries, eNike Benassi Slide
-
Branson Ultrasonics (Shanghai) Co., Ltd.
- W821 Linear Robot
-
The CP6201 "Economy” built-in panel PC with 12 inch display from Beckhoff is customized for injection molding applications. This panel PC offers 40 customized push-buttons and integrates an emergency stop switch and USB 2.0 ports with protection clasNike Business
-
Wittmann Robot (Kunshan) Co., Ltd.
- 5 Color Injection Molding Machine
-
Borch BM260-5C five color injection molding machine was modified from a BT260 IMM. The main injection unit at the center named as “α”. The second Injection unit “β” is at the right side of “α” unit, installed with13 degree angle position. The installFootwear
-
Borch Machinery Co., Ltd.
- BEE Type of Rotary Joint
-
The BEE type rotary joint is designed for circulation in three different media, including gases. BEE circular design of concentric mechanical seal, aluminum body, stainless steel inner tube, spacious high-precision needle roller bearing, the connectiAir Force 1 Foamposite
-
Tengxuan Technology Co., Ltd.
- POLYfill PPHC
-
Our company released a new material short glass fiber reinforced polypropylene. It has a wide application in multi-field, such as automotive interior and outer parts. POLYfill PPHC has excellent anti-aging and heating properties, shorten molding cyclKids Clothes
-
Polykemi Compounds (Kunshan) Co., Ltd.
- MSYZ180~300 Series PVC Wood & Plastic Composite Profile Extrusion Line
-
Using the wooden powder compounded with PVC material and accessory ingredient in one step to extrusion WPC profile. The WPC profile no need to be treatment with the corrosion prevention, which will be good for environment protection; The solid core pAir Jordan XIII Slippers
-
Ningbo Fangli Technology Co., Ltd.
- Autodesk Simulation Moldflow 2013
-
Autodesk® Simulation Moldfow® plastic injection molding software, part of the Autodesk Simulation solution for Digital Prototyping, provides tools that help manufacturers predict, optimize, and validate the design of plastic parts, injection molds, aAir Force 1 Low Flyknit
-
Autodesk Software (China) Co., Ltd.
- UltraShield Composite Wood
-
Meixin’s NewTechWood is a leading brand of eco-friendly composite decking, railing, fencing, cladding, and benches designed to maximize an outdoor living experience. UltraShield, developed by Meixin in 2011, is a revolutionary brand of composite deckNike Hypervenom Phantom III Low
-
Meixin Plastic Lumber Products Manufacturing Co., Ltd.
- The Second Generation of Servo Motor PIMM - Mars Series
-
-
Haitian International Holdings Limited
- Ecodry Cooling Water System
-
The Ecodrygel operates in closed circuit with no evaporation of process water. This is why the process is always kept clean and uncontaminated, the users scale-free, with no need of treating the water hardness; no need for make-up water; no safety, hNike SB Hyperfeel Koston 3
-
Frigel Firenze SpA
- Heat-resistant PLA Composite Material and Its Preparation
-
The heat resistant poly-lactic acid composite material is an ideal green polymer derived from renewable plant polysaccharides. It is non-toxic, HDT up to 90 ℃ or more. After use and disposal to soil, it can be decomposed by microorganisms into CO2 anWomens Footwear Online
-
FUKUTOMI (Shantou) Industrial Limited
- MX Buss Kneader Series with Four Flight Screw Technology
-
New MX kneader with innovative four-flight screw technology was developed with a single target: to significantly improve high-grade compounding efficiency while at the same time enhancing product quality. Operating speed up to 750-800 rpm, throughputNike Paul George PG2
-
Buss AG
- Glass Fiber Reinforced Thermoplastic Pipe
-
Fiber reinforced thermoplastic pipe is composed by plastic liner, treated fiber reinforced layer and jacket layer. With advanced pipe structure, lower cost, lighter weight, long life and supplied in coiling, such perfect combination of fiber glass anNike
-
Guangzhou Advance-Tech Co., Ltd.
- Milacron All-electric Injection Molding Machine ELEKTRON 450-2290
-
The clamping force is 4,500Kn and the tie bar clearance is 870mm×830 mm. Injection Unit is 2290 and injection weight maximum is 2,179g. It’s the latest technology innovation of All-Electric injection molding machine for Milacron China.Air Jordan X 10 Shoes
-
Milacron Plastics Machinery (Jiangyin) Co., Ltd.
- Air Contact Less Profile Measurement
-
Plastcontrol Capacitive auto thickness measurement, accuracy up to 0.1 micro, 6 times per second reaction time. Compared with traditional radiation source, capacitive measurement system is safer, with no need of any importing license in advance. Up tAir Jordan IV 4 Shoes
-
PlastControl
- Shockly®
-
Shockly® is a molding in color effect resin, which is invested by KUMHO-SUNNY. It can achieve the beautiful appearance without painting, plating, screen printing and so on. It has been successfully applied in the Haier air conditioning panel, PanasonAir Jordan VI 6 Shoes
-
Dow Chemical (China) Co., Ltd.