1. 100% Silicone- containing defoamer with hydrophobic particles for WB coating, APEO free. In accordance with the latest regulatory requirements. 2. Perfect defoaming performance, effectively prevent and destroy micro-foam. Especially recommended to be used in airless spraying application high solid and viscous system. 3. Reduce bubbles in the film, improve the thickness of foamless film. 4. Densify the paint film to improve the anti-corrosion performance. 5. Wet the substrate, no negative impact adhesion. 6. Compatibility with variety of WB coating systems.

Huachang Zhidian's Waterbase®C12 adopts a new synthesis process, strictly controls the low boiling point pre distillate of the final product, and has high purity, meeting the requirements of non VOC. At the same time, the proportion of primary ester in the product is greatly reduced compared with the traditional process, and the proportion of secondary ester is increased. This not only improves the boiling point of the product, but also gives excellent performance in rheological response and film forming efficiency.

Corning Guardiant ™ , as a new breakthrough of Corning in glass-ceramic technology, is an antimicrobial additive for paints and surface coatings that harnesses the power of copper to reduce pathogens from painted surfaces. Paints and coatings formulated with Corning Guardiant ™ can kill 99.9% of virus and bacteria on coated surfaces in two hours or less, including Staphylococcus aureus, SARS-CoV-2, etc.

FED-100 is a kind of water-based drying agent with the synergistic effect of various metals. It is suitable for all kinds of air drying resins. It can make the film dry quickly and obtain stable drying effect. It has the following remarkable characteristics: 1. Excellent additivity. It can be added at any stage after being diluted with water in a certain proportion; 2. Excellent yellowing resistance, which can be used in light color paint; 3. When used with hld-061, excellent early water resistance and late hardness can be obtained.

MODAREZ ® range includes the leveling agents for water-soluble system and pure water-based system. Water-soluble System: MODAREZ ® AX50W Improves the long-wave leveling, improve the gloss, fullness and DOI, and not affect the interior adhesion, it is used in various water-soluble systems and high solvent-containing system. Pure Water System: MODAREZ ® PW 336 can improve the long-wave leveling, provides a longer open time to the film, It can help to decrease or replace the level of coalescing agents, and realize the possibility of zero VOC water-based coating formulation. MODAREZ ® PW 363 has all the functions of PW 336, and has a longer paint film opening time and lower viscosity. MODAREZ ® PW 677 is a silicone-modified water-borne leveling agent of acrylic acid.

MCR Rheometers from Anton Paar are the market leader in the field of rheology measurement. Our products are widely used in the coating industry to meet the applications from quality control to product research and development. Rheometer could be used to evaluate the viscosity, fluidity, leveling, sagging and thixotropy of coatings. MCR72/92 are the best solution for QC and QA. MCR102e and MCR302e are the advanced models for R&D.

Based on a grinding disk geometry with additional activation elements and the use of wear-resistant ceramic materials with the highest thermal conductivity, a significant increase in production output, averaging approx. 30%, had already been achieved for these agitator bead mills in 2012. Now the grinding system has been modified again. For this new development, the main focus was on the grinding media separation and optimization of the residence time distribution. While in the original centrifugal separation system the entire process area was divided into a separation zone and a grinding zone, with the new grinding media separation system the entire grinding area can now be filled with grinding media. This quite logically results in an increase in the grinding capacity which corresponds to the grinding media fill volume.

MAINCOTE ™ is a well-known brand name of latex for waterborne maintenance coating, developed by Dow Chemical Company. The MAINCOTE ™ products have been widely used in maintenance coating applications for decades and have great reputation among customers. MAINCOTE ™ HG-300 Emulsion was entirely developed by R&D team of Shanghai Dow Center. The performances of MAINCOTE ™ HG-300 Emulsion well cater to the needs of China customers. It can be formulated into 1K high-performance coating, replacing waterborne epoxy ester, with enhanced drying speed and production efficiency, reduced VOC and odor, and better weatherability. MAINCOTE™ HG-300 Emulsion also shows better salt spray resistance, early water resistance, and anti-flash rust performance compared with acrylic latex in the market. It can be widely used in auto parts, machine ,and railway transportation equipment coating applications. MAINCOTE ™ HG-300 Emulsion was accepted by many customers now because of its good application properties and excellent coating performances.

V - 991 is using nanometer phase hybrid technology, make the distribution of polymer nanoparticles, in the process of synthesis in the process of film coating the surface concave and convex effect, so that the light source of a diffuse physical extinction method, replacing the traditional extinction powder technology, this way of extinction can reach 20 ° to 60 °, 85 ° full extinction Angle, effect is more soft, does not affect the light transmittance.

This Vinyl Chloride Copolymer Emulsion can be applied in anti-corrosive primers instead of alkyd resin. It has good compatibility with pigment & antirust agent. It also has excellent chemical resistance, substrate adhesion and corrosion resistance, at the same time has a certain flame retardant function and good molding, high hardness and etc...

This is a revolutionary breakthrough in foaming equipment technology, including 1) IS40 gear pump system - accurate control of flow to achieve accurate proportional control, higher proportional accuracy than traditional linkage integrated foaming equipment. Closed loop control, when the pressure, temperature, flow beyond the set range can automatically alarm shutdown, avoid spraying quality problems. And the control information can be fed back automatically. 2) The pipeline can control temperature by zones, which makes the temperature control more accurate, the foaming effect better and the cost lower. 3) The structure of the spray gun is much simple and the mixing chamber is split, which reduces the replacement cost.

The HOOSUN IMS is an in-line dispersing machine, which generating a strong suction vacuum in the dispersion zone. With this vacuum it sucks powder dust-free and loss-free directly from a truck, silo, big bag/sack or hopper into liquids. It can handle all liquid products, which are pumpable. The high efficiency rotor stator-design achieved a very high shear rate and therefore an extremely fine particle distribution.

• Can be the alternative of stone on exterior of building • Largely reduce the weight of the building • Compared to the stone, it can Large savings in material and installation costs Facilitates ease of installation and ease of handling Lower maintenance requirements • Meets the demanding weathering requirements of the leading industry specifications: Qualicoat class 2/ AAMA 2604 • Up to 20 year guarantee available

Ealean flexible ceramic temperature resistant anticorrosive coatings is a kind of environmental protection polysiloxane coating with more than 90% effective components. It has excellent weather resistance, high temperature resistance, corrosion resistance, antifouling and excellent construction performance. Weather resistance: 3000H accelerated aging test. Pass. High temperature resistance: Room temperature curing, continuous temperature resistance of 400℃, short-term maximum temperature resistance of 1000℃, Level A1 noncombustible. Corrosion resistance: 3000H salt spray accelerated test. Pass(250 μm thickness). Antifouling: Due to the unique hydrophobic functional groups of the coating, the coating has the "double hydrophobic properties" of hydrophobic and oleophobic, so the surface of the coating has better anti fouling and easy cleaning performance. Environmental protection: VOC emission is 126mg / L, far lower than the national VOC emission standard. Construction performance: spray coating, roll coating and brush coating can be selected. There is no strict requirement for ambient temperature and humidity. The construction is convenient and can be cured at room temperature. At present, the coatings have been widely used in marine engineering, chemical pipeline, petrochemical engineering, new energy vehicles, automobile exhaust pipe, etc.

HCC Escort Energy! Silicon Nitride Reinforcement Internal Drag Reduction (HCC-II), a new generation of steel pipeline anticorrosion material, is another innovation of HCC pipeline anticorrosion after 10 years of service. Super high adhesion, medium and high temperature resistance, long lasting anti-corrosion performance and outstanding internal drag reduction effect, help oil field pipeline transportation energy saving, high efficiency and durability.

The Waterborne UV Monocoat color coating is suitable for one coat on the surface of plastic substrate, such as pen electric cover plate and panel, mouse, button, mobile phone household appliances, wall switch, automobile plastic parts, etc. it can also be used for protective coating on metal alloy substrate primer. The coating has excellent adhesion RCA resistance, chemical resistance and high and low temperature resistance.

PowCarbon ® 81H is a kind of carbon black product that can be widely applied in industrial coatings. It has the balanced properties of jetness, undertone, tinting strength, dispersibility loading amount and cost. It can meet the requirments of industrial coating customers. It can not only be directly applied to coatings, but also be applied to color paste.

Xirallic ® NXT Amur Black is a blue-black effect pigment with a silky-silvery fine texture and a wealth of “Living Sparkle ® .” In brilliant light, the hue seems to consist of millions of sparkling dots and to blur the boundaries between solid and liquid. It is the complex and novel combination of the black shimmer of the surface, the endless motion of the Living Sparkle ® , the chromatically stable depth of color, the harmonious transitions and the highly reflective gleam that makes this pigment ideal for dark hues, giving them an enviable elegance and lightness.

Albester 5070 of Synthomer is a polyester resin which can be cured at low temperature and has excellent blending resistance. This resin can be completely cured with TGIC hardener at 130℃ for 15 – 20 minutes. Albester 5070 has outstanding flexibility and weathering resistance and is suitable for Qualicoat, GSB and AAMA Class 1 approvals. It can be applied onto coiling coatings, thick coatings, hot sensitive substrates, wrinkle effect coatings and so on..